www.edsuk.com
Quick Quote
email us: web@edsuk.com         X
use our form: click here
call us: 0121 213 0149




Power Bollards Rising Retractable Power Posts

edsukpb3 rising power bollard installation

Rising Out of the Ground Power Bollards, Rising Retractable Power Posts & Power Supplies, Rising Power Poles, Rising Power Posts, Rising Energy and Water Bollards. Populated with electrical outlets, populated with water outlets or populated with communications outlets.

A range of manual lift, automatic and semi-automatic power poles and power post rising bollards. Ideal in town centre environments, markets, shopping centre, shows, events, anywhere where temporary power is required but not left on show. The user simply lifts the lid, plugs in their power lead and switches on. One bollard/post can serve many outlets with custom built distribution boards for upto 20 or more populated outlets.

The units can be retracted at the press of a remote control keyring fob, a keypad or from a remote command centre such as a control room (optional).

Ideal for market and events, as opposed to running in temporary power with the associated health & safety issues, the power poles and posts can be installed once and used when required, there are no limits to the amount of units that can be installed. Our rising power bollards are very popular and discrete as they simply popup out of the ground.

Looking for rising popup gates click

Click Here For Details of our Popup Rising Gates

 
  • Retractable Power Post & Poles
  • Minimises Health & Safety Trip Hazards
  • Maintains the Surrounding
  • Secure When Down
  • Aesthetically Pleasing
  • Permanently Installed
With just the turn of a key, the bollard rises alone and locks automatically in the raised position. A push of the foot causes the bollard to retract and lock in the lower position. Wires and extension cables are thus prevented from running on the ground, avoiding possible hazards. Robust design makes your energy supply completely vandal-proof.

The retractable posts and poles can populated for the distribution of: power, & electricity, water, compressed air, telephone services, data connections, security systems etc, etc.

Click Here For Details of our Popup Rising Gates

 

EDSUKPB2 Stainless Steel Power Bollard



EDSUKPB2 Stainless Steel Power Bollard.

.Height: Subject to individual customers requirements, circa 500mm.
.Dimension: Subject to individual customers requirements, circa 400 - 800mm.
.Loading Class: Various Loading Classes Available 1Ton - 90 Ton Rating
.Can be finished in any RAL colour.
.Can be populated with most electrical or electronic equipment to suit individual customers requirements.
.Chequer plate solid top lid design.
.Strengthened Lids to meet required load rating.
.Supplied with ground box complete, to allow for easy installation.
.Heavy duty steel frame.
.Fitted with either hydraulic self opener or maintenance free torsion springs.
.Enclosed hinges for added security.
.Fitted with captive locking device.
.Frames fitted with lifting points to aid site positioning.
.Finished to Hot dipped galvanised to prevent corrosion.

The retractable posts and poles can also be populated for the distribution of: power, & electricity, water, compressed air, telephone services, data connections, security systems etc, etc.

Click Here For Details of the EDSUKPB2 Power Bollard Power Pole

Click Here For Details of our Popup Rising Gates

EDSUKPB3 Retractable Power Post

EDSUKPB3 Retractable Power Post.

.Height: Subject to individual customers requirements, circa 500mm.
.Dimension: Subject to individual customers requirements, circa 600mm x 600mm.
.Loading Class: Various Loading Classes Available 1Ton - 50 Ton Rating.
.Can be finished in any RAL colour.
.Can be populated with most electrical or electronic equipment to suit individual customers requirements.
.Chequer plate solid top lid design.
.Can be supplied with recessed lid to allow for block paving, tarmac or other road finish to be set into the lid, disguising the box and allowing it to blend in with the road finish.
.Strengthened Lids to meet required load rating.
.Strengthened Lids to meet required load rating.
.Supplied with ground box complete, to allow for easy installation.
.Heavy duty steel frame.
.Fitted with either hydraulic self opener or maintenance free torsion springs.
.Enclosed hinges for added security.
.Fitted with captive locking device.
.Frames fitted with lifting points to aid site positioning.
.Finished to Hot dipped galvanised to prevent corrosion.

The retractable posts and poles can be populated for the distribution of: power, & electricity, water, compressed air, telephone services, data connections, security systems etc, etc.

Click Here For Details of the EDSUKPB3 Power Bollard Power Pole

Click Here For Details of our Popup Rising Gates


EDSUKPB4 Hinged Rising Retractable Power Post

EDSUKPB4 Hinged Rising Retractable Power Post.

.Height: Subject to individual customers requirements, circa 500mm.
.Dimension: Subject to individual customers requirements, circa 600mm x 600mm.
.Loading Class: Various Loading Classes Available 1Ton - 50 Ton Rating.
.Can be finished in any RAL colour.
.Can be populated with most electrical or electronic equipment to suit individual customers requirements.
.Chequer plate solid top lid design.
.Can be supplied with recessed lid to allow for block paving, tarmac or other road finish to be set into the lid, disguising the box and allowing it to blend in with the road finish.
.Strengthened Lids to meet required load rating.
.Supplied with ground box complete, to allow for easy installation.
.Heavy duty steel frame.
.Fitted with either hydraulic self opener or maintenance free torsion springs.
.Enclosed hinges for added security.
.Fitted with captive locking device.
.Frames fitted with lifting points to aid site positioning.
.Complete self contained unit, only requires mains incoming power to be connected for either single or three phase, rating subject to load requirements.
.Finished to Hot dipped galvanised to prevent corrosion as standard.

.Power Outlets can be completely customised to individuals requirements.

The retractable posts and poles can also be populated for the distribution of: power, & electricity, water, compressed air, telephone services, data connections, security systems etc, etc.

Click Here For Details of the EDSUKPB4 Power Bollard Power Pole

Click Here For Details of our Popup Rising Gates


EDSUKPB5 Static Power Bollard Post

EDSUKPB5 Static Power Bollard Post Column.

Click Here For Details of our Popup Rising Gates

 

EDSUKPB8 Fixed Energy Distribution Bollards

Fixed Energy Distribution Bollards

The fixed bollard for power supply has been designed to make multiple voltage connections easily. It is available as a single version (up to 6 sockets) or double version (up to 12 sockets). The options are a power supply version, water supply version and combination version.

The bollard is installed by fastening mason screws into a concrete slab. The waterproof level of the units protects the electrical components from oxidizing and bad contacts. Users are protected from electric shock. As an option it is possible to connect one or more sockets while keeping the door closed to avoid unauthorised connections. Made from cast steel and aluminium, this unit gives unequalled impact and vandal resistance.

The retractable posts and poles can also be used for the distribution of: power, & electricity, water, compressed air, telephone services, data connections, security systems etc, etc.

Click Here For Details of the EDSUKPB8 Power Bollard Power Pole

Click Here For Details of our Popup Rising Gates


Power Bollard Load Rating

Power Bollard Load Rating

Class Test Load (Tonnes) - Typical Uses:

GROUP 1 [1.5 Tons] (minimum class A15): Areas which can only be used by pedestrians and pedal cyclists.

GROUP 2 [12.5 Tons] (minimum class B125): Footways, pedestrian areas, domestic driveways and comparable areas, car parks, parking decks, etc.

GROUP 3 [25 Tons] (minimum class C250): Car parks, service stations etc. For gully grates installed in the area of kerbside channels for roads which when measured from the kerb edge, extends a maximum of 500mm into the carriageway and a maximum of 200mm into the footway. For manhole covers this class would be for units needing to withstand a load of 25 tonne. Non-rocking/silent type.

GROUP 4 [40 Tons] (minimum class D400): Carriageways (including pedestrian streets), hard shoulders, and parking areas, for all types of road vehicles. Non-rocking/silent type.

GROUP 5 [60 Tons] (minimum class E600): Areas imposing high wheel loads, eg. Loading bays, docks, aircraft pavements, etc.

GROUP 6 [90 Tons] (minimum class F900): Areas imposing particularly high wheel loads, eg. Ports, aircraft runways.

Click Here For Details of our Popup Rising Gates

  Click on the image to view images or datasheet icon to view datasheet

Datasheets

Power Bollards Rising Power Posts & Drop Down Power Supplies, Rising Power Poles, Rising Power Posts, Rising Power Poles.

Click Here For Details of our Popup Rising Gates

Sign up for our newsletter